78, Jalan Pasar, Pudu,
55100 Kuala Lumpur,
Malaysia.
+6012-716 1623
+603-9221 0207
+603-9221 8927
+603-9221 0207
+603-9221 8927
+603-9221 0819
- Audio Connectors
- AV Switcher/Converter/Splitter
- Arduino/MCU/Sensors
- Battery
- Cables
- DENN P.A. System
- Electronic Components
- Fan Spare Parts
- Inverter
- Measuring Devices/Multimeters
- Noise Monitoring LED
- Power Supply
- Power Stabiliser
- Refrigerator Spare Parts
- Remote Control
- RF Connectors
- Switches
- S H O W P.A. System
- Solar Power System
- TOA P.A. System
- TV & Speaker Brackets
- Pro'sKit
- Washing Machine Parts
- Others
Lian Hup Electronics And Electric Sdn Bhd
78, Jalan Pasar, Pudu,
55100 Kuala Lumpur,
Malaysia.
78, Jalan Pasar, Pudu,
55100 Kuala Lumpur,
Malaysia.
DHT22 Humidity & Temperature Wide Detection Range Sensor Module
The DHT-22 (also known by AM2302) is a digital temperature and humidity sensor module that works with all of the Arduino micro-controllers. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). Its fairly simple to use, but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so when using our library, sensor readings can be up to 2 seconds old.
Simply connect the red 3-5V power, the yellow wire to your data input pin and the black wire to ground. Although it uses a single-wire to send data it is not Dallas One Wire compatible! If you want multiple sensors, each one must have its own data pin!
Features:
- Sensor is composed of a resistive humidity sensing component and an NTC temperature testing component and connects with 8-byte MCU
- MCU outputs a digital code
- Fast response and great anti-interference capability
- Durable and long lasting sensor
- Low power consumption
- Based on the DHT22 & AM2302 sensor architecture
Specifications:
- Operating Voltage: DC 3.3 - 5V
- Current: Max. 2.5mA
- Humidity Measurement range: 0% ~100% | ±2-5%RH
- Temperature Measurement range: -40℃~80℃ | ±0.5 ℃
- Sampling rate: 0.5Hz every 2 seconds
- Connections; GND, Vcc, and Signal