Double Reussen shieded power cable for mains power to your Hi-End Audio Gear. This cable ensures best transport of needed energy (up to 4000 Watt and 33 Ampere current) to our device but due to our exklusive Double Reussen shielding and conductive seperation layer, this is protecting your signal cables nearby even better from humm and RF noise generated by the 50Hz signal going tru the power supply cable. Construction: 1 = Jacket: PVC (YM2) 1.30mm / 0.05in. 13.55mm/0.55 in Ø dark blue 2 = Shield 1: Bare copper wires (0.10 mm/38AWG) 100% coverage S 3 = Shield 2 Bare copper wires (0.10 mm/38AWG) 100% coverage Z 4 = Drain wire: 19x0,18mm / 19x33AWG Ø Cu (Ground) bare copper 5 = Seperation Conductive Fleece Foil (PETPAL), counter wrapped to the twisted conductors. 6 = Insulation 3x: PE-2YI1 0.80mm/0.03in thickness. Nominal Diameter 2.95 mm/0.12in, Color code: Blue-Brown-Yellow/Green 7 = Conductor 3x: 105x0,25mm / 105x30AWG Ø bare OFC copper wires 2,97mm/0.12inØ 5,50mm²/10AWG Technical datas: Conductor resistance: < 3.50 Ohm/km / < 1.1 Ohm/1000ft Rating Voltage: 300/500V Test Voltage: 2000 Veff Temperature range: -30° to +70° C Maximum Watts load: @ current 33 Ampere/Line < 4000 Watt
read more
